Sub-Category: Fibre Accessories

Disposable Bin 645ml.
Used to store fibre ends after cleaving and general cable preparation. Complete with sealable lid

  

IPA Wipes.
Non abrasive lint free wipes to clean fibres and connectors. Pre saturated with ISO propyl alcohol. Individual sealed sachets.
Pack 80.

  

Lint free, Non abrasive wipes.

  

3cc Epoxy Syringe sets used to load epoxy prior to termination.
Pack 5

  

Lapping film in for connector polishing. Sheet size 250x280mm Sold in singles.
Options Include: 0.3um (White), 1.0um (Lime Green), 3.0um (Pink), 5.0um (Brown), 9.0um (Blue), 12.0um (Yellow) & 30.0um (Green).

  

Cold Cure (ST)
Include ST connectors and boots. Approx will terminate 200 connectors

  

Splice Protectors 61mm.
Ideal for use in patch panels or wall enclosures. Complete with self adhesive pad.

  

Splice Protectors 45mm
Ideal for use in patch panels or wall enclosures. Complete with self adhesive pad.

  

1Ltr Alcohol.
Used on lint free wipes to remove grease and dirt from optical fibres during splicing and termination.

  

50cc Alcohol Dispenser,
Pump action allowing a measures amount of fluid into the bowl at the top of the lid.

  

Self Adhesive Twist Clips ideal for securing fibre within patch panels and wall boxes.
Packs of 100 pcs

  

Self adhesive Twist cable clips ideal for securing fibre within patch panels and wall boxes.
Packs of 100pcs

  

Pen style Fibre Scribe with Diamond tip

  

Pen style Fibre Scribe, with Sapphire tip

  

Universal Polishing Puck
FC/SC/ST Manufactured from hard wearing polymer. Universal free floating pucks for 2.5mm ferrule connectors.

  

Used for polishing fibre optic connectors

  

Ratchet style Crimp Tool for fibre optic cabling.

  

Nik Buffer Strippers,
For removing secondary and primary buffers from fibres. Strips the fibre without cuts scratches or niks.
Otions Include: 203um (Red Handle), 254um (Blue Handle ), 305um (White Handle).

  

Tri Hole Strippers
Removes 2-3mm tight jacket 900um secondary buffer and 250um primary coatings. Factory set

  

Fibrescope x200 Magnification
Precision maginification to inspect both multimode and singlemode fibre optic connectors for scraches and dirt. Backlight facility, Battery operated and supplied with universal adaptor and cary case.

  

Fibrescope x400 Magnification
Precision maginification to inspect both multimode and singlemode fibre optic connectors for scraches and dirt. Backlight facility, Battery operated and supplied with universal adaptor and cary case.

  

Pen Style Visual Fault Locator. Used for fibre tracing, routing and checking networks. Pen size, visible laser light at 635nm. Usable with both single and multimode. Range 5km

  

Red laser source for locating breaks. Single and multimode. Universal adaptor to fit ST,SC & FC connectors. Class 11 laser visible up to 5km. Complete with case.